INCH-POUND
MIL-DTL-19246E
05 February 2007
SUPERSEDING
MIL-DTL-19246D
27 December 2000
DETAIL SPECIFICATION
CONNECTOR, OXYGEN MASK HOSE, TYPE MC-3A
Reactivated after 05 February 2007 and may be used for new and existing designs
and acquisitions.
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 This specification covers type MC-3A oxygen mask hose connector for connecting the
oxygen mask hose to the oxygen regulator hose.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3 and 4 of this specification,
whether or not they are listed.
2.2 Government documents.
Comments, suggestions, or questions on this document should be addressed to: Commander,
Naval Air Warfare Center Aircraft Division, Code 491000B120-3, Highway 547, Lakehurst, NJ
08733-5100 or emailed to thomas.omara@navy.mil. Since contact information can change, you
may want to verify the currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 1660
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business