MIL-DTL-87223A (USAF)
SAE INTERNATIONAL
SAE AS4395
Fitting End, Flared, Tube Connection, Design Standard
(DoD Adopted)
SAE AS5132
Fitting End-Hose Connection, Design Standard (DoD
Adopted)
(Copies of these documents are available from SAE International, 400 Commonwealth Dr.,
Warrendale, PA 15096-0001 or at https://www.sae.org.)
2.4
Order of precedence.
In the event of a conflict between the text of this document and the references cited herein, the
text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3.
REQUIREMENTS
3.1
First article.
When specified (see 6.2), a sample shall be subjected to first article inspection in accordance
with 4.2.
3.2
Materials
Materials shall conform to applicable specifications and standards as specified herein and on
applicable drawings. Materials which are not covered by specifications and standards, or
specifically described herein, shall be reported to the contracting activity and will require
contracting officer approval prior to use. Materials shall be of the best quality, of the lightest
practical weight, and suitable for the purpose intended.
3.2.1 Recycled, recovered, or environmentally preferable materials.
Recycled, recovered, or environmentally preferable materials should be used to the maximum
extent possible, provided that the material meets or exceeds the operational and maintenance
requirements, and promotes economically advantageous life cycle costs.
3.2.2 Metal parts.
All metal parts shall be of a corrosion-resistant material or treated in a manner to render them
adequately resistant to corrosion.
3.2.2.1 Dissimilar metals.
Unless protected against electrolytic corrosion, dissimilar metals as defined in MIL-STD-889
shall not be used in intimate contact with each other.
3.2.3 Nonmetallic materials.
Any nonmetallic material that is adversely affected by continued use with air shall not be used.
3.2.3.1 Elastomer components.
Elastomer components, except silicone, shall be not more than 12 months old from the date of
manufacture to the date of delivery to any government service or to any airframe or accessory
manufacturer.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business