INCH-POUND
MIL-PRF-83867D (USAF)
26 September 2007
SUPERSEDING
MIL-PRF-83867C (USAF)
10 August 1998
PERFORMANCE SPECIFICATION
CONNECTOR, OXYGEN MASK HOSE, NON-EJECTION TYPE
This specification is approved for use by the Department of the Air Force and is available for
use by all Departments and Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope
This specification covers the non-ejection type mask hose connector assembly used in
conjunction with the aviator oxygen mask or full-face fire fighter's mask.
2.
APPLICABLE DOCUMENTS
2.1 General.
The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended
for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified
requirements of documents cited in sections 3 and 4 of this specification, whether or not they
are listed.
Comments, suggestions, or questions on this document should be addressed to ASC/ENOI,
2530 Loop Road West, Bldg 560, Wright-Patterson AFB OH 45433-7101 or e-mailed to
Engineering.Standards@wpafb.af.mil. Since contact information can be changed, you may
want to verify the currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 1660
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business