MIL-PRF-83867D (USAF)
ASTM INTERNATIONAL
B 633
Standard Specification for Electrodeposited Coatings of Zinc
on Iron and Steel (DoD-adopted)
(Copies of this document are available from https://www.astm.org or ASTM International, 100
Barr Harbor Dr., West Conshohocken, PA 19428-2959.)
SAE INTERNATIONAL
AMS 2417
Plating, Zinc-Nickel Alloy (DoD-adopted)
(Copies of this document are available from https://www.sae.org or SAE International, 400
Commonwealth Dr., Warrendale, PA 15096-0001.)
2.4 Order of precedence.
In the event of a conflict between the text of this document and the references cited herein, the
text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3.
REQUIREMENTS
3.1 Qualification.
The connectors furnished under this specification shall be products that are authorized by the
qualifying activity for listing on the applicable qualified products list before contract award (see
4.2 and 6.3).
3.2 Recycled, recovered or environmentally preferable materials.
Recycled, recovered, or environmentally preferable materials should be used to the maximum
extent possible, provided that the material meets or exceeds the operational and maintenance
requirements, and promotes economically advantageous life cycle costs.
3.3 Materials.
All materials shall be suitably treated to resist corrosion due to electrolytic decomposition,
fungus, salt spray, and any other atmospheric condition that may be encountered during
operational use or storage. The use of toxic chemicals, hazardous substances, and ozone
depleting chemicals (ODCs) shall be avoided, whenever feasible.
3.3.1 Nonmagnetic materials.
Except where magnetic materials offer definite advantages, nonmagnetic materials shall be
used for all components.
3.3.2 Nonmetallic materials.
Any nonmetallic materials that are affected adversely by continued use with oxygen shall not be
used. Plastics which crack, chip, or permanently set under a compressive load of 200 psi shall
not be used.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business