MIL-DTL-5886H
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers low pressure storage cylinders for compressed gas
with a working pressure of 450 psi for aerospace application.
1.2 Part or Identifying Number (PIN). PINs to be used for cylinders acquired to this
specification are created as follows:
M 5886 - X
Configuration (see table IV)
Specification number
M prefix
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of these lists, document users are cautioned that they must meet all specified
requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are
listed.
2.2 Government documents.
2.2.1 Specifications, and standards. The following specifications and standards form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of
these documents are those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
BB-A-1034
-
Compressed Air, Breathing
FEDERAL STANDARDS
FED-STD-595/13655
-
Yellow, Gloss
COMMERCIAL ITEM DESCRIPTIONS
A-A-58092
-
Tape, Antiseize, Polytetrafluorethylene
A-A-59503
-
Nitrogen, Technical
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business