MIL-DTL-5886H
(ASTM documents may be obtained at <https://www.astm.org> or addressed to the American
Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959)
AMERICAN WELDING SOCIETY (AWS)
AWS D17.1
Specification with Fusion Welding for Aerospace
Applications
(AWS documents may be obtained at <https://www.aws.org/w/a/> or from American Welding
Society, 550 N.W. LeJeune Road, Miami, Florida 33126.)
METALS AND ALLOYS IN THE UNIFIED NUMBERING SYSTEM (UNS)
S30403
-
Austenitic Cr-Ni Stainless Steel (Low Carbon)
S31600
-
Austenitic Cr-Ni Mo Stainless Steel
(SAE documents may be obtained at <https://www.sae.org/> or from Society of Automotive
Engineers, Inc., 400 Commonwealth Drive, Warrendale PA 15096.)
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE ARP1176
-
Oxygen System and Component Cleaning and
Packaging
SAE AS4863
-
Plug, Pipe, External Thread
(SAE documents may be obtained at <https://www.sae.org/> or from Society of Automotive
Engineers, Inc., 400 Commonwealth Drive, Warrendale PA 15096.)
2.4 Order of Precedence. Unless otherwise noted herein or in the contract, in the event
of a conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.3.
3.2 Materials. The materials used in all parts of the cylinders shall be in accordance with
Metals And Alloys in The Unified Numbering System S30403, S31600, or stainless maraging
steel conforming to the following chemical composition:
C
0.05 percent max
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business