MIL-DTL-87255A(USAF)
AMERICAN SOCIETY FOR QUALITY (ASQ)
ANSI/ASQ Z1.4
Sampling Procedures and Tables for Inspection by Attributes (DoD
Adopted)
(Copies of this document are available online at www.asq.org or from the American Society for
Quality, 600 North Plankinton Ave., Milwaukee WI 53203-2914.)
SAE INTERNATIONAL
SAE AS 4395
Fitting End, Flared, Tube Connection, Design Standard (DoD
Adopted)
SAE AS 5132
Fitting End-Hose Connection, Design Standard (DoD Adopted)
(Copies of these documents are available online at https://www.sae.org or from SAE
International, 400 Commonwealth Dr., Warrendale, PA 15096-0001.)
2.4
Order of precedence.
Unless otherwise noted herein or in the contract, in the event of a conflict between the text of
this document and the references cited herein, the text of this document takes precedence.
Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3.
REQUIREMENTS
3.1
First article.
When specified (see 6.2), a sample shall be subjected to first article inspection in accordance
with 4.2.
3.2
Material.
Materials shall conform to applicable specifications and standards as specified herein and on
applicable drawings. Materials which are not covered by specifications and standards, or
specifically described herein, shall be reported to the acquisition activity and shall require
contracting officer approval prior to use. Materials shall be of the best quality, of the lightest
practical weight, and suitable for the purpose intended.
3.2.1 Recycled, recovered, or environmentally preferable materials.
Recycled, recovered, or environmentally preferable materials should be used to the maximum
extent possible, provided that the material meets or exceeds the operational and maintenance
requirements, and promotes economically advantageous life cycle costs.
3.2.2 Metal parts.
All metal parts shall be of a corrosion-resistant material or treated in a manner to render them
adequately resistant to corrosion.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business